Warning icon

New location coming soon: Zurich, Switzerland



It is one thing to own a site and it definitely is another to make sure that the site is up and running efficiently, user friendly, has the basic requirements and the most important features that a site would need to operate. These often represent the necessary criteria to ensure that users across the globe have a good experience anytime the web page is engaged. Therefore, it is safe to say that the site should have the core user expectations.

Core web vitals are the basic and essential materials that a site should possess. The sole aim of core web vitals achieve is to measure the key factors of the user experience. It is imperative that the website be developed, of a good standard and must be effective with regards to the metrics related to speed, rapid response and visual stability.

The core web vitals quantify the various aspects of web user experience such as the interactivity, duration of time used in loading pages and the stability of content while loading. It is therefore pertinent to understand that these core web vitals are not fixed or permanent as they vary from year to year depending on what users desire from a good web page experience.

However, until Google makes it public knowledge about the change in metrics, these are the core web vitals that users expect. Google, on one hand, intends to assist more site owners to construct web pages that every user across the world would enjoy visiting with little to no frustrations. This is because once it seems like a web page is providing high-quality web usability, based on its page experience signal, Google’s algorithms will most likely rate the page higher in search results. With the help of Google we have been made to understand that there are three major web vitals;

– First Input Delay

– Largest Contentful Paint

– Cumulative Layout Shift


Largest Contentful Paint

Taking a cue from the name, this is a tool used to measure the length of time that it takes for the page’s main content to load and appear on the screen, be it an image or a text. Once the page has a good grade, it helps to ensure the users that the site has good speed and loads fast, which often drives more traffic to the site.

When the site is slow on the other hand, it ends up frustrating the user and the user may eliminate the possibility of visiting the same site consequently.

It takes an ideal LCP measurement of approximately 2.0 -3.0 seconds or faster to appear on the screen. It doesn’t merely measure the time it takes for a page to fully load, but it concerns itself with when the largest content is displayed on the screen.

Once the most important and largest content loads quickly, the site will appear fast to the users. Before the emergence of these particular metrics, there was the First Meaningful Content which was used to determine the time when the first meaningful content element was displayed on the screen.

However, the First Meaningful content metric often couldn’t deduce the most meaningful element that was visible on the screen. In conclusion, the largest contently paint is designed to acquire information about the site as it relates to the duration the site requires for the largest content to appear on the screen.


First Input Delay

This is one metric that seeks to measure the appropriate time it requires for a webpage to become interactive. If the speed of the website is good and above average, then the browser will appear more responsive to the users. This is because the sole aim of site owners is to ensure that their users derive positive satisfaction from relating with the browser.

As a site owner, the responsiveness of your website should be of paramount importance to you. If it is your desire to give your users a good experience then you should ensure that there are no delays. The browser should be free and not engaged in other background tasks because when it loads the page it looks as good as it could be but when the user taps a button there’s no response.

Now, this is a bad experience and it often ends up frustrating the user. In order to accelerate the series of events involved in getting the content element on the screen and making it interaction-friendly, we need to ensure that the FID is intact.

The FID cannot be measured if there is no user interface. Therefore, without data from users, google cannot foretell the FID based on its own data. It is important to note that a perfect measurement is less than 100ms as it appears responsive to users. Anything above 100ms and 300ms needs to be worked on and it will be regarded as poor performance.


Cumulative Layout Shift

This web vital was just introduced as a new metric. Its major aim is to find out the stability of the content element displayed on the screen. This particular metric is concerned with the frequency at which images or content is seen moving about on the screen while it loads.

Now, a typical example of this is seen with Ads. If a user visits a page and a lot of ads pop up and obstruct or disturb the major content from loading on the screen, it can lead to frustration.  There are various websites that appear too busy while the page is loading. Oftentimes, a lot of other unwanted content jumps around the screen, and it takes a certain period before it stabilizes and becomes useful to the user.

Another thing that causes large layout shifts is images. This fault usually emanates from the developer and then is passed down to the browser. All these layout shifts cause the user to become annoyed and frustrated.

Does A Dedicated Server Help With Increasing Site Speed?

It is trite that speed is of paramount importance for every website. As it is the speed of a site that attracts users to visit the website regularly. If the site is slow, it is not just bad for the user, but also the site owner. A slow site can oftentimes result in bad business for the site owner.

The rankings for the website are most likely expected to be low based on its poor performance in the speed department. This leaves the site owner and the user agitated.

Now the first question here is “what do you do to increase your site speed?” The most logical answer is to switch on to a dedicated server.

Although it can be quite cost-intensive, (good things aren’t easy) It is very effective. It brings about a certain degree of efficiency to the site.

Over the past few years, businesses have come to the realization that pages that load slowly will not attract users and they do not want that. That is why many businesses are doing everything within their power to get dedicated servers, and small businesses are not exempted.

Since dedicated servers help in increasing the speed, and there is a growing market for affordable, yet efficient dedicated servers, most small businesses have keyed into the initiative to provide a better online experience for their clients.

Before getting dedicated servers, there are certain things that should be put into consideration. It is important that the type of site you have to be considered before acquiring a dedicated server. The content of the site and the number of sites one possesses should also be weighed before coming to a conclusion.

If your site is remotely small, then you might not need a dedicated server. If the site has quite a large number of pages or content elements, then you probably would need a good and reliable dedicated server.

Dedicated servers help websites to grow and since there will be a lot of traffic on the site, it makes perfect sense to keep this in mind as well. This is especially true for online vendors.

While using dedicated servers, a single server is solely utilized by a business. This is why dedicated servers are the best as the resources they offer are top-notch and exclusively for one business.

In conclusion, if you experience difficulties in operating your website as a result of dynamic traffic needs, or if you want more control over your server, or perhaps, you’d rather ensure better-secured data, then it is of utmost importance that you get a dedicated server.